Casters – 209Z Attachments
The 209Z series light duty caster comes in bright zinc plated standard. Options include swivel, rigid and total clock casters. Wheel sizes are 3×1, 4×1 and 5×1” wide Light duty wheel. The 209Z series has double ball raceways and 175lb capacity. Great for carts, toolboxes, small parts bins, movable tables.
By choosing the 209P light duty caster, you can trust that your equipment will stay up and running, reducing the need for costly repairs and downtime. Invest in quality casters that are built to last and experience the difference in performance and longevity.
Select By Attachment
EC22 – Friction Grip Ring Stem Attachment
Dimensions: 0.4375×1.375in
Install Note:
1) Remove the old caster. Usually, the old caster can be removed by just pulling it out of its socket. Use pliers or the claw side of a hammer for additional leverage if needed.
2) If you haven’t already, measure the length of the caster stem to make sure you get the right replacement.
3) If the piece of equipment or furniture uses round or square sockets, it’s a good idea to inspect these for damage, and replace them if necessary.
4) Insert the new caster into place. It may be hard at first as you’ll have to get the actual ring to fit inside the socket. If needed, use a rubber mallet or another soft tool to gently tap the caster into place and prevent damage.
QE24 – Stem Attachment
Threaded Stem:
Dimensions: 3/8-16×1.5in
Note: Threaded nut & washer are sold separately.
S330 – 4 Hole Attachment Plate
Mounting Plate:
Outer Dimensions: 2.375×3.625in
Bolt Hole Spacing: 1.75×2.875 slotted to 1.75x3in
Attaching Bolt Size: 5/16in
Note: Mounting hardware available, sold separately.