Casters – 209Z Series – EC22

Dimensions: 0.4375×1.375in

Install Note:

1) Remove the old caster. Usually, the old caster can be removed by just pulling it out of its socket. Use pliers or the claw side of a hammer for additional leverage if needed.

2) If you haven’t already, measure the length of the caster stem to make sure you get the right replacement.

3) If the piece of equipment or furniture uses round or square sockets, it’s a good idea to inspect these for damage, and replace them if necessary.

4) Insert the new caster into place. It may be hard at first as you’ll have to get the actual ring to fit inside the socket. If needed, use a rubber mallet or another soft tool to gently tap the caster into place and prevent damage.